FREE SAMPLE
MAKING HEAT DETECTION EASY
If your heat detection isn’t up to scratch then you won’t get your cows in calf! The timing of artificial insemination is critical to good conception rates. ESTROTECT HEAT DETECTORSTM is the best heat detection device available in New Zealand. ESTROTECT HEAT DETECTORSTM is a heat detection device which is designed to take the hassle out of detecting when your cows are on heat. In 2012 we sold over 800,000 ESTROTECTS to New Zealand dairy farmers!
So does your staff know how to pick a cow that is in heat? ESTROTECT HEAT DETECTORSTM are a great tool to assist in teaching staff to identify when a cow is on heat.
“This was our first season trying ESTROTECT HEAT DETECTORSTM and to start with one of our staff members was very reluctant to changing from tail paint, however now that he has tried them he has completely turned around and will not go back!” June Johansen - Hamilton
New EstroTect Design
Why use ESTROTECT HEAT DETECTORSTM over traditional heat detection methods like tail paint?
-
Brilliant signal layer is exposed after several mountings, detecting standing heat with extreme accuracy – virtually no more false positives!
-
Self-adhesive which is simple to apply
-
Once applied the ESTROTECT stay in place in rain, snow or heat
-
No re-application necessary
-
Herd colour management system allows you to use different colours to track and identify subsequent matings.
-
No messy glue or markers
-
Easy storage and shipping, not dangerous goods.
Easy to read, easy to use
-
After a single mounting: The reflective signal layer begins to show.
-
After 3-5 mountings: More of the signal layer is exposed after several mountings.
-
After more than 5 mounts: Most of the signal layer is revealed, indicating several mountings of an animal in true standing heat.
HOW TO USE ESTROTECT HEAT DETECTORSTM
Keep ESTROTECT® warm just before application. As long as the product is kept warm, it can be applied in any weather conditions.
WARM
|
WIPE
|
STICK
|
Wipe the application area with a cotton chore glove or towel. ESTROTECT® sticks to the hair, so dirt and oils must be wiped away. Avoid using solvents to clean.
|
Wipe the application area with a cotton chore glove or towel. EstroTect® sticks to the hair, so dirt and oils must be wiped away. Avoid using solvents to clean.
|
Press ESTROTECT® onto the animal’s hair across the backbone (side to side). Rubbing ESTROTECT® onto the hair will not damage the silver rub-off surface.
|
Ready!
Check for heat in the morning and evenings. The bright signal layer will begin to show after the first mount. True standing heat is detected after several mounts, revealing most of the bright signal layer.
• In winter conditions trim long hair if necessary.
DO NOT clip hair extremely short
• With sand bedding, thoroughly clean all sand from hair.
• Remove ESTROTECT® from liner and apply to the tailhead area between the hip and pin bones.
For smaller cows, positions lightly forward of normal
• IMPORTANT – Do not store product in direct sunlight
ESTROTECTTM Starter Kit
•ETSROTECTTM rubber brush – to remove heavy soiling in the application area
• ESTROTECTTM cleaning cloth
• One packet of 50 ESTROTECTTM patches (your choice of colour)
• Chilly bin – to store your ESTROTECTTM products
Only $112.50 +GST |
|
Interested in ESTROTECTS or an ESTROTECT starter kit then
Click here to buy online
